For surveying, mapping and navigation. Comes with a mobile app.
NRs 1,50,000 plus VAT
BuyEmlid co-founder and CEO Igor Vereninov on what Reach RS+ is and how it works.
The most user-friendly software for data collection that is available both for Android and iOS. With ReachView, you can collect and stake out points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.
Record each position as a point with centimeter-precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.
Formats
DXF, CSV, GeoJSON, ESRI Shapefile
Stakeout is used to find exact physical locations of points. They can be collected in ReachView
or imported from other CAD or GIS software.
The stakeout process in ReachView has two steps: map view and bulls-eye. Map's purpose is to
help you navigate to points on long distances. When you get closer than 40 cm to the point,
bulls-eye turns on to make it easier for you to visually match the receiver and point.
Formats
CSV, DXF and GeoJSONs
Record raw data, position and base correction logs. Point collection and the recording of RAW
data are independent processes and can be used simultaneously. ReachView has a simple and
intuitive interface for logging configuration and control.
Record raw data, position and base correction logs. Point collection and the recording of RAW
data are independent processes and can be used simultaneously. ReachView has a simple and
intuitive interface for logging configuration and control.
Formats
8 GB
storage
80+ days
of logging at 1 Hz
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
Reach can turn on and off automatically
Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach, for example, if the receiver is placed on the roof of a tractor.
Compatible apps
MachineryGuide, AgriBus-Navi, Efarmer, Agripilot, and others
Position streaming
Interfaces
RS-232, TCP, Bluetooth
Reach RS+ needs a base station as a source of corrections. That’s a requirement for centimeter
accuracy in RTK and PPK. The base might be either another Reach RS+ receiver or an NTRIP
service. VRS is also supported.
Reach RS+ works seamlessly with other Reach receivers over any link.
Interfaces
TCP, LoRa, Bluetooth, RS-232, NTRIP
Formats
RTCM3
Up to 10 km in RTK 20 km in PPK
IP67
Can be held 1 meter deep under water for half an hour.
-20ºС…+65ºС
Working temperature. Isn’t afraid of either heat or cold.
30 hours
Industrial LiFePO4 battery that doesn’t die on cold. Charges over USB from a powerbank.
The ReachView app and all features of Reach RS+ are included
569 kb
Mechanical
Electrical
Positioning
Connectivity
Data
GNSS